It appears your 2018 Airstream Bambi Sport, 16' has a 3,500 lb. Torflex axle. You will want the # K71-707-01, this will give you a lift of 2-5/8 inches. view full answer...
I really wish there was a way to determine what bearings a trailer needed without actually pulling the wheel off and checking, but there isn't. The only two solution I have for you would be to remove the hubs and get the numbers that are stamped on the bearing or for you to remove the hubs and use a digital or dial caliper to measure where the bearings and seal ride (see pic).
With that info I can help you figure out what you need. view full answer...
If the loaded tongue weight of your trailer is under 600 lbs then the Equal-i-zer Weight Distribution System part # EQ37060ET will work for you just fine. There is no other reason it would not work for you assuming the above holds true. The only thing you need to make note of is the weight of any cargo behind the rear axle of the vehicle as this will get added to your total tongue weight figure as well.
If your trailer has a 2-5/16" coupler then you will also need part # EQ91-00-6100. view full answer...
Since a 15 amp RV surge protector is not available you can use the # HU97FR you were looking at. Typically you want to match the rating on the surge protector with the service on your trailer, but the 30 amp won't have any issues with your 15 amp. This will require an adapter so you can use the # A10-1530ARDVP.
The Honda EU2000i is a floating neutral generator. You will in fact need the Hughes Autoformers Ground Neutral Bonded Plug for Generators # HU33FR. This will create a neutral to... view full answer...
The Lippert Components High-Speed Power Stabilizer Jack # LC298707 fits the very standard mounting hole dimensions that are separated by 68-11/16 inches. I'd be surprised if your 2019 Bambi Sport 22FB wasn't compatible but if somehow, it's not we have the Ultra Fab kit part # UF39-941705 which is designed to fit frame widths of 48 to 80 inches so it would definitely fit if the Lippert does not. We don't have a way to look up your frame dimensions otherwise I would check! view full answer...
The Karrier ST225/75R15 Radial Tire with 15" White Spoke Wheel # AM32680 will definitely be a good option for a spare. There is really only one bolt pattern used for 6 lug wheels on trailers, and Airstream follows that standard when they use them. Though I could not find a standard used for the tire size, this is a pretty common one so that should be good as well. With this also being a Load Range E, it is rated to 2,830 pounds at 80 psi so it should cover whatever you can throw at it. view full answer...
The TorkLift PowerArmor Locking Battery Box # TLA7708R that you referenced weighs 21 lbs. I attached a review video for this for you to check for more info as well. view full answer...
The trailer mover I suggest for your 3500-lb Airstream Sport travel trailer is the Trailer Valet 5X model # STC-V211. This 2-speed chain-drive trailer mover simply clamps on to either side of your A-frame (no welding and no drilling) and it can handle the loaded trailer tongue weight up to 500-lbs. It features an automatic brake for your safety.
You can hand-crank the Valet or use the cordless drill adapter # TVDA to give you a really easy method for maneuvering the trailer into tight... view full answer...
The 14 inch wheels of your trailer would have the same bolt pattern as the Aluminum Sendel Series T02 Machined Trailer Wheel # AM22653 that you referenced. That means that these would bolt up to your trailer hub.
If you went with a 205/75-15 sized tire for this rim like the # TR20515D you'd gain about 1/2 an inch of tire height which wouldn't really be noticeable. If you went with a 225/75-15 like the part # TTWTRTM2257515D instead you'd gain about 1-1/2 inches. view full answer...
I recommend checking out the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 for your application. This installs in the same location as your A-Frame jack and sits high enough that it should clear your front storage compartment (see attached photo).
In addition to this being installed on the trailer you can pick up the Bump-It Hitch Receiver Adapter # LC723359 so that you can use this bike rack on your Tundra once you've reached your campsite.
Attached are some review videos for you... view full answer...
Yes, the Dexter Nev-R-Adjust brake assembly set part # 23-468-469 is the correct fit for your 2017 Airstream Sport 16 camper. Then for the correct hub/drum you'd need the part # AKHD-545-35-EZ-K and you'd be set. view full answer...
I looked up your Dexter axle info and you have a 3,500 lb Torflex axle which the part # K71-707-01 would be the correct lift kit for. This will give you a lift of 2-5/8 inches. view full answer...
Based on what we have found in the past, your 2018 Airstream Sport has a Dexter #10 Torflex axle with a 3,500 lb capacity. I recommend checking your axle tag to verify this information. Assuming that is correct, the lift kit you need is the # K71-707-01. This will give you a 2-5/8" lift for additional clearance. view full answer...
Go To Results